Joint characteristics and process parameters optimization on friction stir welding of AA 2024-T6 and AA 5083-H111 aluminum alloys Scientific paper
Article Sidebar
Main Article Content
Abstract
Friction stir welding (FSW) is a recent method for welding in a solid-state environments. The FSW parameters, namely pin rotation speed, welding speed, axial force and tool tilt angle affect weld joint microstructure and tensile strength. The study optimizes process settings to enhance mechanical properties and uses Response surface methodology (RSM) to predict the ultimate tensile strength (UTS) of FS-welded AA 2024-T6 and AA 5083-H111. These parameters must be understood in order to get optimal mechanical qualities in manufacturing. The created model predicted tensile strength within 5 % of experimental data, helping optimize process parameters for FSW joints. Tool tilt angle affects heat, material flow, defect generation, welding force, and friction stir weld joint quality.
Downloads
Metrics
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution license 4.0 that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
References
T. Fagan, V. Lemiale, J. Nairn, Y. Ahuja, R. Ibrahim and Y. Estrin, J. Mater. Process. 231 (2016) 422 (https://doi.org/10.1016/j.jmatprotec.2016.01.009)
K. Kimapong and T. Watanabe, Weld. J. 83 (2004) 277
M. Ghaffarpour, M. Kazemi, M. J. Mohammadi Sefat, A. Azizand K. Dehghani, Proc. Inst. Mech. Eng. Part L: J. Mater.: Des. Appl. 231 (2017) 297 (https://doi.org/10.1177/1464420715595652)
R. Palanivel, P. K. Mathews, N. Murugan and I. Dinaharan, Mater. Des. 40 (2016) 7 (https://doi.org/10.1016/j.matdes.2012.03.027)
K.cP Mehta and V. J. Badheka, Mater. Manuf. Process. 31 (2016) 255 (https://doi.org/10.1080/10426914.2014.994754)
P. Cavaliere, E. Cerri and A. Squillace, J. Mater. Sci. 40 (2005) 3669 (https://doi.org/10.1007/s10853-005-0474-5)
C. Sharma, V. Upadhyay and B. S. Narwariya, Mater. Res. Express. 6 (2018) 026524 (https://doi.org/10.1088/2053-1591/aaeca3)
M. Sindhuja, S. Neelakrishnan and B. S. Davidson, Mater. Res. Express. 8 (2021) 106525 (https://doi.org/10.1088/2053-1591/ac2daf)
K. Elangovan, V. Balasubramanian and S. Babu, Mater. Des. 30 (2009) 188 (https://doi.org/10.1016/j.matdes.2008.04.037)
H. A. Kumar and V. V. Ramana, Mater. Today: Proc. 27 (2020) 951 (https://doi.org/10.1016/j.matpr.2020.01.270)
D. Vijayan and V. S. Rao, Res. J. Appl. Sci. Eng. 7 (2014) 4503 (http://dx.doi.org/10.19026/rjaset.7.827)
A. R. Kumar, R. Pandiyarajan, G. R. Raghav, K. J. Nagarajan, S. Rengarajan, S. D. Pandian and K. Sudhakar, J. Chin. Inst. Eng. 46 (2023) 81 (https://doi.org/10.1080/02533839.2022.2141338)
G. Kasirajan, S. Rengarajan, G. R. Raghav, V. S. Rao and K. J. Nagarajan, Metall. Res. Technol. 117 (2020) 405 (https://doi.org/10.1051/metal/2020039)
Z. Li, D. Lu and X. Gao, J. Build. Eng. 36 (2021) 102101 (http://doi.org/10.1016/j.jobe.2020.102101)
K. P. Mehta and V. J. Badheka, Mater. Manuf. Process. 31 (2016) 233 (https://doi.org/10.1080/10426914.2015.1025971)
P. Edwards and M. Ramulu, Sci. Technol. Weld. Join. 14 (2009) 669 (https://doi.org/10.1179/136217109X12464549883330)
S. S. Sabari, S. Malarvizhi and V. Balasubramanian, J. Manuf. Process. 22 (2016) 278 (https://doi.org/10.1016/j.jmapro.2016.03.014)
M. A. Wahid and A. N. Siddiquee, Trans. Nonferrous Met. Soc. 28 (2018) 193 (https://doi.org/10.1016/S1003-6326(18)64653-9)
P. Mastanaiah, A. Sharma and G. M. Reddy, J. Mater. Process. Technol. 257 (2018) 257 (https://doi.org/10.1016/j.jmatprotec.2018.03.002)
W. Xu, H. Wang, Y. Luo, W. Li and M. W. Fu, J. Manuf. Process. 35 (2018) 261 (https://doi.org/10.1016/j.jmapro.2018.07.028)
J. Verma, R. V. Taiwade, C. Reddy and R. K. Khatirkar, Mater. Manuf. Process. 33 (2018) 308 (https://doi.org/10.1080/10426914.2017.1291957)
Bagheri, M. Abbasi, F. Sharifi and A. Abdollahzadeh, Met. Mater. Int. 28 (2022) 2239 (https://doi.org/10.1007/s12540-021-01121-4)
V. P. Singh, S. K. Patel, N. Kumar and B. Kuriachen, Sci. Technol. Weld. Join. 24 (2019) 653 (https://doi.org/10.1080/13621718.2019.1567031)
M. Garg, A. Raturi and A. Bhattacharya, Int. J. Adv. Manuf. Technol. 105 (2019) 155 (https://doi.org/10.1007/s00170-019-04186-z)
R. K. Bhushan and D. Sharma, Int. J. Mech. Mater. Eng. 15 (2020) 1 (https://doi.org/10.1186/s40712-020-00119-x)
R. Kumar and V. Pancholi, J. Manuf. Process. 68 (2021) 1214 (https://doi.org/10.1016/j.jmapro.2021.06.051)
K. Elangovan, V. Balasubramanian and S. Babu, J. Mater. Eng. Perform. 17 (2008) 820 (https://doi.org/10.1007/s11665-008-9240-6)
M. Zhai, C. Wu and H. Su, J. Manuf. Process. 59 (2020) 98 (https://doi.org/10.1016/j.jmapro.2020.09.038)
X. Wang, Y. Xiao, L. Shi, M. Zhai, C. Wu and G. Chen, J. Mater. Res. Technol. 25 (2023) 38 (https://doi.org/10.1016/j.jmrt.2023.05.184)
D. Trimble, G. E. O’Donnell and J. Monaghan, J. Manuf. Process. 17 (2015) 141 (https://doi.org/10.1016/j.jmapro.2014.08.007)
N. Dialami, M. Cervera and M. Chiumenti, Metals. 9 (2019) 1 (https://doi.org/10.3390/met9010028)
R. Saravanakumar, T. Rajasekaran and C. Pandey, Proc. Inst. Mech. Eng. Part E: J. Proc. Mech. Eng. 237 (2022) 2334 (https://doi.org/10.1177/09544089221134446)
W. F. Xu, Y. X. Luo and M. W. Fu, Mater. Charact. 138 (2018) 48 (https://doi.org/10.1016/j.matchar.2018.01.051)
G. Di Bella, F. Favaloro and C. Borsellino, Metals. 13 (2023) 1176 (https://doi.org/10.3390/met13071176).